Specialty Coatings - Online Order Form

General Information:
Name:	*
Company Name:
Address:	*
City:	*
County:	*
State:	*
Zip:	*
Email Address:	*
Daytime Phone:	(XXX)-XXX-XXXX *
Evening Phone:	(XXX)-XXX-XXXX
Ship To Address (If different from above):
Name:
Company Name:
Address:
City:
State:
Zip:
Item Details:
Please Select a "Powder Coat" Color: White Yellow Orange Red Blue Green Silver Satin Black Gloss Black Flat Black More Colors Available Upon Request! Please Call for Details! or / Select a "Ceramic Coat" Color: Cermakrome Cast Iron Gray Black Satin
Part Description:
Quantity:
	(NOTE: To add additional parts click continue below.)
Comments:
Shipping Options:
Shipping Method:	UPS
	Customer Pickup
	Logistics Carrier / Other:
Next Day or Same Day Service:	Rush Order (Additional Charges may Apply)
Payment Options:
Payment Method:	Visa **
	MasterCard **
	Discover Card **
	Personal or Cashiers Check     (NOTE: Check must be received before parts will be shipped.)
Terms and Conditions:
PROFESSIONAL PLATING INC. SPECIALTY COATINGS STANDARD TERMS AND CONDITIONS OF SALE It is generally recognized that even after employing all of the science known to us, and capable personnel with years of training, there still remain variables in the finishing industry. Therefore, to avoid misunderstandings, Professional Plating, Inc. is restating the following Terms and Conditions as the custom and usage of the trade. These Terms and Conditions apply to all Specialty Coatings sales. 1. We warrant that processing and finishing shall be free from defects in material or workmanship at the time of delivery. If the customer specifies methods and procedures to be followed, we will assume no responsibility for the correctness of such methods and procedures or the result when they are followed. Professional Plating, Inc. is not liable for incidental or consequential damages and further makes no warranty, expressed or implied, as to the merchantability or fitness for a particular purpose of any product or service subject to this agreement. 2. Our liability is limited to defects in material or workmanship and is further limited to not more than the actual cost billed by our company for materials we have sold and services we have rendered. Our charges are based upon this policy limiting liability. By placing your order you expressly agree to these limitations. 3. In order to assert a claim against us, the customer must return any material or merchandise processed by us for our inspection. No claim shall be allowed until such an inspection is performed by us, or the opportunity for inspection has been declined in writing by us. Responsibility and cost pertaining to the transportation of the product in question will be handled on an individual basis and agreed upon between both parties. 4. To satisfy a claim, we will have the right, but not the obligation, to refinish the material at our cost. Any material or merchandise found, upon our inspection, to be improperly processed by us may be refinished without charge provided materials or merchandise returned have not been altered structurally or chemically since processed by us. Processing or assembly of any such rejects by you or any other party shall constitute a waiver of any liability on our part. 5. In the event that results of our finishing operations are unsatisfactory due to metal imperfections, changes in grade or composition of materials, manufacturing and/or fabrication imperfections, usages for which the finishing operation was not reasonably designed, and similar variables over which we have no control, the customer will be required to pay the contracted amount for the finishing operation performed. 6. We reserve the right, at our option, either to reject work or make an extra charge for finishing any base metal below our agreed standard. You will be notified of the situation, and your written approval of such charges sent back to us, prior to any extra charges and/or services being applied. These processes not limited to but could include, derusting, sandblasting, etc. will necessitate additional charges. Again, you will be informed of the situation and your written approval sent to us prior to the extra processes being performed and billed. 7. We shall not, under any circumstances, be considered as an insurer of customer's material or merchandise and shall not be liable, regardless of cause, for loss by fire, explosion, theft, pilferage, vandalism, casualty or acts of God while such material or merchandise is in our possession. 8. For special or experimental processing, our charges are not contingent upon success of the work or the benefit derived by the customer. 9. In the event of customer's cancellation of order, the customer shall reimburse us for the work completed. 10. All customer's materials and merchandise in our control shall be subject to a general lien for all monies owing by the customer to us, whether or not due or payable. 11. During storage and transportation of customer's material or merchandise, customer's containers used for delivery to us shall be used for reshipment and any damage resulting from the use of such containers shall be at the customer's risk. Should the customer desire other packaging or containers, we will charge for materials and handling and will provide such service upon receipt of a written order. Additional charges may be incurred by the customer for repackaging goods to other specifications. 12. The provisions of the Uniform Commercial Code shall govern, except as provided in these Terms and Conditions to the contrary and all interpretation of the terms of the transaction between the parties shall be governed by the laws of the State of Wisconsin. 13. If any provision or part of this instrument shall be declared invalid by a court of competent jurisdiction, such invalidation shall not affect the valid provisions hereof. 14. Customer shall pay and discharge all costs, expenses and attorney's fees which shall be incurred and extended by us in enforcing the covenants and agreements of this contract, whether by the institution of litigation or in taking the advice of counsel, or otherwise. 15. We make no warranties or representations, expressed or implied, as to workmanship, performance, quality, and durability, fitness for purpose or merchantability for any of the articles we process. This disclaimer is for all liability including, among other, liability for consequential, incidental, and special damages. The only warranties applying to such articles are those which are written and are specially provided by us. Seller makes no warranties concerning the manufacturer's warranties. THE WARRANTY EXPRESSED IN THIS PARAGRAPH 15 IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. 16. The provisions hereof constitute the entire agreement between parties. Any changes, alterations, waivers or modifications with respect either as to the job performed or the terms of sale, or any other matter set forth herein must be in writing and signed by a duly authorized representative of Professional Plating, Inc., specifically stating our intent that these TERMS AND CONDITIONS are intended to be modified or supplemented. These terms and conditions shall apply to any existing or future order or agreement for the processing of any materials or merchandise. Our acceptance of your order is expressly made conditional on your assent to these Terms and Conditions. Professional Plating Inc. terms and conditions supersede and replace any buyer’s terms and conditions in conflict with Professional Plating Inc. terms.
I Accept the Terms and Conditions Stated Above
Please Enter This Verification Code:

* Required Information

** To protect your privacy we do not accept your credit card information online. We will call you back personally to serve you and protect your information.